The Conjugate Heat Transfer, Laminar Flow and Turbulent Flow Interfaces
When a multiphysics interface is added from the Heat Transfer>Conjugate Heat Transfer branch of the Model Wizard or Add Physics window, Heat Transfer and one of the Single-Phase Flow interfaces (laminar or turbulent flow) are added to the Model Builder.
In addition, the Multiphysics node is added, which includes the multiphysics coupling feature Nonisothermal Flow.
The Multiphysics Branch in the COMSOL Multiphysics Reference Manual.
•
The Laminar Flow interface () combines a Heat Transfer in Solids and Fluids interface with a Laminar Flow interface.
•
The Turbulent Flow, Algebraic yPlus interface () combines a Heat Transfer in Solids and Fluids interface with a Turbulent Flow, Algebraic yPlus interface.
•
The Turbulent Flow, L-VEL interface () combines a Heat Transfer in Solids and Fluids interface with a Turbulent Flow, L-VEL interface.
•
The Turbulent Flow, k-ε interface () combines a Heat Transfer in Solids and Fluids interface with a Turbulent Flow, k-ε interface.
•
The Turbulent Flow, Realizable k-ε interface () combines a Heat Transfer in Solids and Fluids interface with a Turbulent Flow, Realizable k-ε interface.
•
The Turbulent Flow, k-ω interface () combines a Heat Transfer in Solids and Fluids interface with a Turbulent Flow, k-ω interface.
•
The Turbulent Flow, SST interface () combines a Heat Transfer in Solids and Fluids interface with a Turbulent Flow, SST interface.
•
The Turbulent Flow, Low Re k-ε interface () combines a Heat Transfer in Solids and Fluids interface with a Turbulent Flow, Low Re k-ε interface.
•
The Turbulent Flow, Spalart-Allmaras interface () combines a Heat Transfer in Solids and Fluids interface with a Turbulent Flow, Spalart-Allmaras interface.
•
The Turbulent Flow, v2-f interface () combines a Heat Transfer in Solids and Fluids interface with a Turbulent Flow, v2-f interface.