Flux
This node can be used to specify the species molar flux across a boundary. The flux can for example occur due to chemical reactions or a phase change at the boundary. The flux can also represent the transport to or from a surrounding environment currently not included model.
The prescribed flux of a species c is by default defined as
where n denotes the outward pointing normal of the boundary. When the mass transport includes migration of ionic species, the flux is defined as:
The flux prescribed, J0, can include any arbitrary user-specified expression. It can be constant or a function of a dependent variable or independent variable. Common examples are a flux dependent of the concentration, temperature, pressure, or the electric potential ϕ.
When defining conditions on boundaries between different phases, see the section Prescribing Conditions on Fluid-Solid Interfaces.
convection
By default, the flux due to diffusion and migration in an electric field is prescribed. This is the appropriate flux condition when the relative velocity at the boundary is zero. When the fluid velocity is not equal to that of the boundary, it is often convenient to prescribe the total flux, including the convection. To do this select Include in the Convection section.
When including the convection, the prescribed flux is defined as:
or
when migration of ionic species is included.
Inward Flux
Select the Species check box for the species for which to specify the flux, and enter a value or expression for the inward flux in the corresponding field. Use a minus sign when specifying a flux directed out of the system. To use another boundary condition for a specific species, click to clear the check box for that species.
External convection
Set Flux type to External convection to prescribe a flux to or from an exterior domain (not modeled) assumed to include convection. The exterior can for example include a forced convection to control the temperature or to increase the mass transport. In this case the prescribed mass flux corresponds to
where kc is a mass transfer coefficient and cb is the bulk concentration, the typical concentration far into the surrounding exterior domain.