When you have enabled the plot array functionality by selecting the Enable check box in the Plot Array section in a 2D or 3D plot group node, you can control the behavior of each plot in the plot group using the settings in the Plot Array sections that appear. See Plot Array for the plot group settings for creating plot arrays.

By default, the Belongs to array check box is selected, so that all plots in the plot group are part of the plot array. Clear this check box to exclude that plot from the plot array. If desired, select the Manual indexing check box to rearrange the plots in the plot array. You can use the indexing to create “holes” (extra displacement) in the array, for example. For a linear array, enter the 0-based index in the Index field. For a square plot array, enter 0-based index values in the Row index and Column index fields. If you do not use a manual indexing, the plots in the plot array are ordered as the order of the plot nodes in the plot group.

The Apply to dataset edges check box is selected by default; clear that check box to exclude the dataset edges.