Add solution data points from the general non-continuation parameter values lists, if uselsqdata is set to true.

Use all for continuation, if uselsqdata is set to true.

Name of the controlling study step or user if the feature is controlled manually.

Create bounding box from general parameter value lists, if uselsqdata is set to true.

Setting this property to on the initial damping factor is used for all parameter steps.

Setting this property to on enables the use of the properties pinitstep, pmaxstep, and pminstep.

Initial step size for parameter. See paramtuning.

List of parameter values. Obsolete, use plistarr instead.

For pcontinuationmode=manual this is one of the parameter names from pname.

Parametric values loop order. If set to auto, a more efficient loop order is used if possible.

Maximum step size for parameter. See paramtuning.

Minimum step size for parameter. See paramtuning.

Output either the parameters in plist or the solution at the expansion points.

Method for doing the parameter variation. For sweeptype=sparse, the parameter tuples defined by the columns in plistarr are solved for. This method requires equal length for the rows. For sweeptype=filled, all parameter combinations given by plistarr are solved for.