COMSOL 6.2

Split geometric entities of an imported mesh by a box.

model.component(<ctag>).mesh(<tag>).create(<ftag>,"Box");

model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection();

model.component(<ctag>).mesh(<tag>).feature(<ftag>).set(property,<value>);

model.component(<ctag>).mesh(<tag>).feature(<ftag>).getType(property);

Use model.component(<ctag>).mesh(<tag>).create(<ftag>,"Box") to split geometric entities of an imported 2D or 3D mesh by an element set defined by a box.

Use model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection() to specify geometric entities to split. If you do not specify the selection, the feature operates on the entire geometry.

The following properties are available:

Table 4-17: Available Properties.
Property	Value	Default	Description
condition	allvertices \| somevertex	allvertices	Condition for inclusion of an element
xmin	double	-inf	Minimum x-coordinate of box
xmax	double	inf	Maximum x-coordinate of box
ymin	double	-inf	Minimum y-coordinate of box
ymax	double	inf	Maximum y-coordinate of box
zmin	double	-inf	Minimum z-coordinate of box
zmax	double	inf	Maximum z-coordinate of box