Interior Velocity
Use the Interior Velocity node to specify a velocity on an interior boundary in thermoviscous acoustics. Add this node from the Interior Conditions submenu.
The condition can be used to specify sources, for example, the velocity of a diaphragm in a miniature transducer that is modeled using a lumped circuit model. The velocity components can be prescribed independently, and there is an option to force continuity in pressure across the boundary, as well as options for the thermal conditions.
Coordinate System Selection
Select the Coordinate system to define the orientation of the prescribed quantities (the velocity). The default is the Global coordinate system, any other applicable system will be listed.
Mechanical
To define a prescribed velocity for each space direction, select one or more of the Prescribed in x direction, Prescribed in y direction, and Prescribed in z direction check boxes. Then enter a value or expression for the prescribed velocities u0x, u0y, or u0z (SI unit: m/s), here given in a 3D component and for the Global coordinate system selection. The prescribed values that you specify are interpreted in the selected Coordinate system and space dimension.
Select the Continuous pressure check box if the velocity condition is to be used as a source where the pressure should not be slit.
Thermal
Select a Thermal condition — Isothermal (the default) or Adiabatic. See the Isothermal and Adiabatic conditions for further details.
Constraint Settings
To display this section, click the Show More Options button () and select Advanced Physics Options in the Show More Options dialog box. For the Interior Velocity condition the Constraint method is set to Nodal.
Excluded Edges/Points
To display this section, click the Show More Options button () and select Advanced Physics Options in the Show More Options dialog box. See Suppressing Constraints on Lower Dimensions for details.