Configuration of Perfectly Matched Layers (PMLs) for Acoustic–Structure Interaction Models
Care should be taken when setting up perfectly matched layers (PMLs) in models that include fluid domains and solid domains. In general models with several different materials, that being different solids or different fluids.
Two configurations exist for the PMLs in these systems:
The PML regions of two physics (or two different material models) are adjacent and in contact. In this case, a single PML feature should be used for the two PML domains. Set the Typical wavelength from to User defined and enter a value based on the longest wavelength. For example, for an air-steel system enter: 5770[m/s]/freq
The shorter wavelengths should be captured by increasing the mesh resolution or increasing the PML scaling curvature parameter. This will ensure optimal damping of all wavelengths in the system. In any case, control the convergence of the results by increasing the number of mesh layers in the PML.
Infinite Elements, Perfectly Matched Layers, and Absorbing Layers in the COMSOL Multiphysics Reference Manual.
The reason that two PML features cannot be used when the PML domains are adjacent to each other is that the scaling inside the PMLs will differ (because of different speeds of sound). This will lead to an unphysical situation at the interface between the two PMLs which results in errors in the solution. Spurious waves may be generated.
See the Acoustic–Structure Interaction with a Perfectly Matched Layer (PML) model in the Application Gallery on the COMSOL website. It is located here: https://www.comsol.com/model/acoustic-structure-interaction-with-a-perfectly-matched-layer-pml-23521