Virtual Operations on a Wheel Rim Geometry

CAD geometries, especially those imported from CAD design software, may contain small features, such as faces or edges, that could significantly increase the number of mesh elements in the model. An efficient modeling approach is to avoid such small features by using virtual geometry operations to “hide” them from the mesher. A benefit of using virtual geometry operations is also that the curvature of the geometry is preserved, which could be important for certain physics applications, such as stress analysis.

In this tutorial you prepare a wheel rim geometry for stress analysis by defeaturing it using virtual geometry operations. The stress analysis is described in the model Submodel of a Wheel Rim found in the Application Libraries for the Structural Mechanics Module.

See also the tutorials Removing Small Geometric Entities with the Defeaturing Tools, Removing Small Geometri Entities with Remove Details, and Removing Small Geometric Entities with Repair, available in the Application Libraries for the CAD Import Module, Design Module, and the LiveLink for CAD products.

Model Definition

The geometry to be meshed is of a ten-spoke rim design, shown in Figure 1.

Figure 1: Wheel rim geometry.

To provide accurate results for the stiffness of the rim create a mesh for the analysis using the default normal predefined mesh settings. Apply virtual geometry operations to reduce the number of elements in the mesh.

Results and Discussion

The mesh generated with the original geometry consists of about 220,000 tetrahedral elements, see Figure 2 below.

Figure 2: Mesh of the geometry before applying virtual geometry operations

Due to small faces and edges, the mesh generated with a default normal size setting contains information messages. These messages indicate that some small features could not be resolved by the mesher using the current settings. The selections in the Information nodes can help in locating these geometric entities.

The final mesh, after the virtual geometry operations, consists of about 180,000 tetrahedral elements, see Figure 3 below, which means a reduction of about 15% using the same mesh settings.

Figure 3: Mesh of the geometry after applying virtual geometry operations

This is a significant reduction of elements which reduces the memory requirements for computing the solution.

The number of elements vary based on the used geometry kernel. If you are using the option with the CAD kernel, you can expect more elements than the values given in this document.

Notes About the COMSOL Implementation

Virtual geometry operations appear after the Finalize node in the geometry sequence. Virtual geometry operations do not modify the geometry, rather they hide geometric entities, such as faces, edges or vertices, from the mesher. As a result, a virtual geometry is meshed, hence the name of these operations.

As a starting point for where on the geometry to apply virtual operations ,use the information from the messages provided by the mesher. Information nodes are generated for those small faces or edges that the mesher cannot resolve with the current settings.

For an efficient workflow, you can take advantage of the symmetry of the rim design. Rather than creating selections on the full wheel geometry you can apply the virtual operations on only a fifth of the rim. When done recreate the full rim geometry from the segments. The selections of the virtual operations automatically extends to include the full geometry.

COMSOL_Multiphysics/Meshing_Tutorials/wheel_rim

Modeling Instructions

From the menu, choose .

In the window, click

In the window, click

The wheel rim geometry has been saved in the COMSOL MPHBIN-format.

In the toolbar, click

In the window for , locate the section.

Click

Browse to the model’s Application Libraries folder and double-click the file wheel_rim.mphbin.

Click

Now, generate the full geometry using a transform operation.

Rotate 1 (rot1)

In the toolbar, click

and choose .

Select the object only.

In the window for , locate the section.

Click

In the dialog box, choose from the list.

In the text field, type 0.

In the text field, type 4/5*360.

In the text field, type 5.

Click .

Right-click and choose .

Click the

button in the toolbar.

Form Union (fin)

Continue with adjusting the repair tolerance for the operation. This is sometimes necessary when working with imported CAD design geometries.

In the window, click .

In the window for , locate the section.

From the list, choose .

In the text field, type 1.1E-5[m].

In the toolbar, click

Mesh 1

In the window, under click .

In the window for , locate the section.

From the list, choose .

Click

Information 1

This node contains a selection of edges that are much shorter than the minimum element size specified by the element size.

Information 2

In the figure below you can see the regions of high mesh density around the bolt holes and in the region of the fillets between the spoke and the rim drum.

These regions indicate small faces or small edges, which you can also locate if you examine the entities reported in the nodes for the mesh.

Geometry 1

Using the operation, you will merge the faces of several fillets in the geometry.

First, disable the node to work only with the reduced geometry, which will limit the number of selections you have to create for the virtual operations.

Rotate 1 (rot1)

In the window, under right-click and choose .

Form Composite Faces 1 (cmf1)

In the toolbar, click

and choose .

To add faces to the selection, you can pick faces one by one in the window, or use the tool from the Graphics toolbar to select multiple faces at once. A faster alternative is to enter, or copy and paste the list of face numbers from the instructions into the dialog box.

Go to the window, under the section click the button. In the list enter: 2-9,11-17,19-27, 29, 31-46, 51-110, 112-136, 138-160, 162-197, 199-208.

Click the