The Electromechanics interface (
), found under the
Electromagnetics-Structure Interaction (
) branch within the
Structural Mechanics branch (
) or the
Electromagnetics and Mechanics (
) branch within the
AC/DC branch (
) when adding a physics interface, combines Solid Mechanics and Electrostatics with a moving mesh functionality to model the deformation of electrostatically actuated structures. The
Electromechanics interface is available for 3D, planar 2D, and axisymmetric 2D geometries.
When this multiphysics interface is added using the Model Wizard, a
Solid Mechanics interface and an
Electrostatics interfaces are added to the
Model Builder. In addition, the
Multiphysics Couplings node is added, which automatically includes the multiphysics coupling feature
Electromechanical Forces.
The full functionality of the Solid Mechanics and Electrostatics interfaces is accessible under the corresponding interfaces at the domain, boundary line, or point level in the geometry. The participating Electrostatics interface by default adds the
Charge Conservation node with its selection set to all domains, and the material type set to Solid. This node serves to represent solid dielectric material domains. Any number of
Charge Conservation nodes can be also added manually to the interface and configured to represent either solid or nonsolid (for example, air or free space) materials.