When the predefined Heat Transfer with Surface-to-Surface Radiation interface (
) is added (found under the
Heat Transfer branch (
) of the
Model Wizard or
Add Physics windows), it combines the Heat Transfer in Solids and the Surface-to-Surface Radiation interfaces to model heat transfer by conduction, convection, and radiation in transparent media.
As a predefined multiphysics coupling, Heat Transfer in Solids and
Surface-to-Surface Radiation interfaces are added to the Model Builder. In addition, a
Multiphysics node is added, which automatically includes the
Heat Transfer with Surface-to-Surface Radiation multiphysics coupling feature.
The Heat Transfer with Surface-to-Surface Radiation multiphysics coupling is also available when there is at least one of each of the following interfaces with the specified model activated:
|
|
|
In the Model Input section of the Diffuse Surface default feature, the Temperature, T, is automatically set to the variable from the Heat Transfer with Surface-to-Surface Radiation multiphysics coupling feature.
|
|
In 2D and 1D axisymmetric components, in the Physical Model section of the interface, the Thickness, dz, is automatically set to the variable from the Heat Transfer with Surface-to-Surface Radiation multiphysics coupling feature.
In1D components, in the Physical Model section of the interface, the Cross sectional area, Ac and the Cross sectional perimeter, Pc, are automatically set to the variables from the Heat Transfer with Surface-to-Surface Radiation multiphysics coupling feature.
|
|
The Heat Transfer in Solids and Surface-to-Surface Radiation interfaces are preselected.
|