Table Graph
Add a Table Graph () plot to display data from a table with one line per output column. Right-click a 1D Plot Group, Polar Plot Group, or Smith Plot Group to add this plot type. First define a table to plot. This plot is also available from the plot groups’ contextual ribbon toolbars, by clicking Graph Plot on the Evaluation Group contextual ribbon toolbar (to plot the evaluation group in graph plot), or by selecting Table Graph () from the Table window’s toolbar.
Go to Common Results Node Settings for links to information about the Coloring and Style section.
Data
From the Source list, choose Table or Evaluation group, and then choose a table or evaluation group table with the data that you want to plot as a surface plot from the Table of Evaluation group list below.
If the table data refers to a row-based table (that is, a table with data on rows and sample points on columns), select the Row-based check box to specify row-based plotting of the table data.
From the x-axis data list (or θ angle data for polar plots), select the column to use as x-axis: Select Row index to use the table’s row indexes (row numbers) as x-axis, or leave it at Automatic to let the software determine the input from the data in the table.
The Plot columns or Plot rows (depending on if the Row-based check box is selected or not) list controls which columns or rows to plot. All excluding x-axis (or All excluding θ angle list for polar plots) indicates all columns not used in x-axis data (or θ angle data). Select Manual instead to specify which columns to plot in the Columns or Rows list.
If available, select a Transformation of the data from the table — None (the default) to use the data directly without any transformation, or select Discrete Fourier transform to use an discrete Fourier transform (DFT) to transform the data from a time-dependent solution to the frequency domain. If you select to display a DFT, choose one of the following options from the Show list:
•
 Real part, to show the real part of the output only.
•
 Imaginary part, to show the imaginary part of the output only.
•
 Amplitude, to show the amplitude of the output (the default).
•
 Phase, to show the phase of the output.
•
 Frequency spectrum, to display the function’s frequency spectrum by computing the number of frequencies and the frequency range based on the FFT (fast Fourier transform) of the function. The transform is valid for all functions, but what you get corresponds to a periodic continuation of the function outside the chosen bounds. To specify these values manually, select the Number of frequencies check box and enter a value in the associated field (the default is based on the number of time samples). From the Scale list, choose None (the default), Multiply by sampling point, or Divide by number of frequencies. You can choose to scale with the sampling period to show Fourier transform values instead of a pure DFT transform. Select the Scale check box to scale the values on the y-axis so that their magnitude reflects the magnitude of the original signal. The values then have the same unit as the input data for the FFT. For a pure sinusoid, the scaled value is the peak magnitude divided by the square root of 2 (). Select the Frequency range check box and then enter the bounds of the frequency range in the Minimum and Maximum fields (in Hz). The FFT algorithm uses resampling based on linear interpolation. The x-axis shows the frequency (in Hz). By default, the y-axis shows the unscaled Fourier coefficients.
If you have selected Amplitude or Frequency spectrum, you can select the In dB check box to present the values in dB. From the dB type list, choose 10log (the default) or 20log. The display in dB requires a reference value. From the dB reference list, choose Maximum (the default) to use the maximum value as the reference, or choose Manual to enter a suitable reference value in the Reference value field.
If you have selected Real part, Imaginary part, Amplitude or Phase, the following additional settings are available: To specify this value manually, select the Number of uniform samples check box and enter a value in the associated field. If desired, select the Inverse transform check box to use an inverse DFT. Select the Mask DC check box to set the DC value (zero frequency component) to zero (not available if Inverse transform is selected). The Ignore last sample check box is selected by default to not include the last sample in the transform (not available if Inverse transform is selected). The Shift zero frequency and Scale with sampling period check boxes are selected by default. Clear one or more of these check boxes if you want to exclude those steps.
If you have chosen None from the Transformation list, use the Sorting list to sort the sort the data points with respect to x- or y-coordinates. Choose None (the default, no sorting), x-axis data, or y-axis data.
By default, table plots only display the real data in a table, just as other plot types display real data unless you use the imag function in the expression. To display the imaginary part of complex-valued data in a table, when available, select the Plot imaginary part check box. This option is only available when a transformation to the frequency domain is not used.
In the settings for a Smith Plot Group, this section includes a Data interpretation list, where you can choose Reflection (the default), Impedance, or Admittance.
y-Axis
This section is only available if the Two y-axes check box is selected in the Plot Settings section of the parent 1D Plot Group node’s Settings window.
Select the Plot on secondary y-axis check box to plot the y-axis data on the secondary y-axis to the right of the plot instead of the primary y-axis to the left of the plot.
Preprocessing
This section contains settings to preprocess the data in the table graph by scaling and shifting the data values, which can be useful to match data from different sources or to scale some data to express the values in another unit, for example.
Under x-axis column and y-axis column, from the Preprocessing list select:
•
None (the default), for no preprocessing of the data.
•
Linear, to preprocess the data using a linear transformation of the data values for the x- or y-axis column. You define the linear preprocessing with values for the scaling (default: 1) and the shift or offset (default: 0) in the Scaling and Shift fields, respectively. The default values do not change the original data values.
Legends
Select the Show legends check box to display the plotted expressions to the right of the plot. In plots where each line represents a certain time value, eigenvalue, or parameter value, these values are also displayed.
When Automatic is selected from the Legends list (the default), the legend texts appear automatically. You can add a prefix or a suffix to the automatic legend text in the Prefix and Suffix fields. If Manual is selected from the Legends list, enter your own legend text into the table.