Plot windows are also graphics windows. COMSOL Multiphysics generates such plot windows for displaying convergence results and to monitor probe values while solving (if your model contains probes). To create a new plot window, choose Plot In>New Window from the context menu for a plot group.

The COMSOL Desktop always includes The Graphics Window, which is the default window for all kinds of plots, but you can also add other plot windows for results plots by right-clicking a plot group node and choosing Plot In>New Window or by adding a plot window in the Window Settings section of the plot group nodes’ Settings windows.

The default for all plot groups is to plot in the Graphics window, but you can plot in any other plot window by right-clicking the plot group node and choosing another plot window from the Plot In submenu. The Plot In submenu also exists in the context menu for each plot type if you want to plot only an individual plot type in a plot group. You can also control where the plots appear and add new plot windows in the Window Settings section of the Settings windows for the plot group nodes.

To create and update all plots in all plot windows, right-click the Results node and select Plot All (). If more than one plot group use the same plot window, that plot window contains the plots from the last plot group. To update all plots under a Group node, right-click that node, and then select Plot All in Group.

If you want to prevent a plot in a plot window from being overwritten by other plots, you can lock the plot window. To prevent a plot displaying in this window from being overwritten by other plots, click the Lock Plot Window button () on the plot window toolbar. Any attempt to create a plot in a locked plot window then results in a message such as Window 'Plot 1' is locked in the Messages window. Click the Lock Plot Window button () again to clear the lock. It is not possible to lock the Graphics window, which COMSOL Multiphysics uses for general visualization.