IntersectLine

Intersect an imported 2D mesh with a straight line. The operation will partition geometric entities and intersect mesh elements to introduce straight boundaries in an intersected domain.

Syntax

model.component(<ctag>).mesh(<tag>).create(<ftag>,"IntersectLine");

model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection();

model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection(property);

model.component(<ctag>).mesh(<tag>).feature(<ftag>).set(property,<value>);

model.component(<ctag>).mesh(<tag>).feature(<ftag>).getType(property);

Description

Use model.component(<ctag>).mesh(<tag>).create(<ftag>,"IntersectLine") to partition geometric entities and mesh elements of an imported mesh by specifying a straight line.

Use model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection() to specify the geometric entities to split with the line. If you do not specify the selection, the feature operates on the entire geometry.

The following properties are available:

Table 4-12: Available Properties
Property	Value	Default	Description
point	vertex \| coord	coord	How the point is specified.
coord	double[]	{0 0}	Point on line, if point is coord.
vertex	vertex selection		Specify the point by selection of vertex.
direction	vertex \| coord \| vector	vector	How the direction is specified.
coord2	double[]	{0 1}	Second point on line, if direction is coord.
dirvector	double[]	{0 1}	Direction of line, if direction is vector.
vertex2	vertex selection		Second point on line, if direction is vertex.
toltype	auto \| relative \| absolute	auto	Snapping tolerance specification.
abstol	double		Absolute point snapping tolerance, if toltype is absolute.
reltol	double	0.01	Relative point snapping tolerance, if toltype is relative.