Edge

Create an edge mesh.

Syntax

model.component(<ctag>).mesh(<tag>).create(<ftag>,"Edge");

model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection();

model.component(<ctag>).mesh(<tag>).feature(<ftag>).set(property,<value>);

model.component(<ctag>).mesh(<tag>).feature(<ftag>).getType(property);

model.component(<ctag>).mesh(<tag>).feature(<ftag>).create(<ftag1>,ftype);

Description

Use model.component(<ctag>).mesh(<tag>).create(<ftag>,"Edge") to create an edge mesh.

Use model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection() to specify the edge selection. If you do not specify a selection, the feature creates a mesh on the remaining entities in 1D. In 3D and 2D, the default selection is empty.

Use model.component(<ctag>).mesh(<tag>).feature(<ftag>).create(<ftag1>,ftype) to add Size or Distribution attribute features.

The following properties are available:

Table 4-38: Available Properties for Edge
Property	Value	Default	Description
smoothcontrol	on \| off	on	Specifies if the operation smooths the mesh across removed control entities.
smoothmaxiter	integer	4	Specifies the number of smoothing iterations.
smoothmaxdepth	integer	4	Specifies the maximum element smoothing depth.