Adding a Chemical Species Transport Interface
A chemical species transport interface can be added when first creating a new model, or at any time during the modeling process.
Creating a New Model in the COMSOL Multiphysics Reference Manual
1
To add a physics interface:
-
Select New to open the Model Wizard, after selecting a space dimension, go to the Select Physics page.
-
From the Home toolbar, click Add Physics (). Or right-click the Component node in the Model Builder and select Add Physics. Go to the Add Physics window.
2
Under Chemical Species Transport, navigate to the physics interface to add and double-click it.
There are other ways to add a physics interface depending on whether you are in the Model Builder or Add Physics window:
-
In the Model Wizard, click Add or right-click and select Add Physics (). The physics interface displays under Added physics interfaces.
-
In the Add Physics window, click Add to Component () or right-click and select Add to Component.
3
Specify the number of species (concentrations or mass fractions) and the names:
-
In the Model Wizard, on the Review Physics Interface page under Dependent Variables.
-
In the Add Physics window, click to expand the Dependent Variables section.
-
After adding the physics interface, you can also edit this information — click the node in the Model Builder, then, on the Settings window under Dependent Variables, specify the information.
4
Continue by adding more interfaces and specifying the number of species (concentrations or mass fractions) that are to be simulated in a mass transport physics interface when adding that interface.
5
In the Dependent Variables section, enter the Number of species. To add a single species, click the Add Concentration button () underneath the table or enter a value into the Number of species field. Click the Remove Concentration button () underneath the table if required.
The Transport of Concentrated Species interface needs to contain at least two species (the default). Also edit the strings or names directly in the table. The names must be unique for all species (and all other dependent variables) in the model.