Interior Impedance
Use the Interior Impedance node to apply a transfer impedance condition on an interior boundary. The condition relates the normal stress at the two sides of the boundary (up and down) to the normal velocity via the normal specific transfer impedance Zn. The condition allows discontinuities (a slit) in pressure and temperature depending on the condition chosen for the temperature.
Mechanical
Enter a value or expression for the Specific transfer impedance Zn (SI unit: Pas/m).
Select a condition for the Tangential velocitySlip (the default) or No slip. The No Slip option will apply an additional constraint for the velocity in the tangential direction on the two sides of the interior boundary.
Thermal
Select a Thermal conditionIsothermal (the default) or Adiabatic. See the Isothermal and Adiabatic conditions for further details.
Constraint Settings
To display this section, click the Show More Options button () and select Advanced Physics Options in the Show More Options dialog box.
Excluded Edges/Points
To display this section, click the Show More Options button () and select Advanced Physics Options in the Show More Options dialog box. See Suppressing Constraints on Lower Dimensions for details.