Pressure (Adiabatic)

Pressure (Adiabatic)

Use the node to specify a prescribed pressure pbnd, that acts as a pressure source at the boundary, typically an inlet or outlet. In the frequency domain pbnd is the amplitude of a harmonic pressure source. The adiabatic condition states that no heat flows into or out of the boundary:

This condition is in general not physically correct on a solid wall because solids are generally better thermal conductors than air.

Enter the value of the pbnd (SI unit: Pa) at the boundary. The default is 0 Pa.

Constraint Settings

To display this section, click the button (

) and select in the dialog box.

Excluded Edges/Points

To display this section, click the button (

) and select in the dialog box. See Suppressing Constraints on Lower Dimensions for details.