The Pressure Acoustics, Asymptotic Scattering (paas) interface (
), found under the
Acoustics>Pressure Acoustics branch (
) when adding a physics interface, is used to model scattering problems at high frequencies using the Kirchhoff–Helmholtz integral formulation. The acoustic field is assumed to be locally plane such that the scattered field can be expressed analytically. The scattering object has to be acoustically large; the wavelength should be much smaller than important geometric features as well as the radius of curvature of important features, see
Ref. 69,
70, and
71. The scattering analysis is only valid for open domains. The harmonic variation of all fields and sources is given by
eiωt using the
+iω convention.
When this physics interface is added, these default nodes are also added to the Model Builder —
Pressure Acoustics,
Background Pressure Field,
Scattering Object (with
Wall subfeature), and
Exterior Field Calculation. Then, from the
Physics toolbar, add other nodes that implement, for example, boundary conditions and source. You can also right-click
Pressure Acoustics, Asymptotic Scattering to select physics features from the context menu.
The Label is the default physics interface name.
The Name is used primarily as a scope prefix for variables defined by the physics interface. Refer to such physics interface variables in expressions using the pattern
<name>.<variable_name>. In order to distinguish between variables belonging to different physics interfaces, the
name string must be unique. Only letters, numbers, and underscores (_) are permitted in the
Name field. The first character must be a letter.
The default Name (for the first physics interface in the model) is
paas.
The settings selected here are only used if the transient solution solved is transformed into the frequency domain using the Time to Frequency FFT study. The zero level on the dB scale varies with the type of fluid. That value is a reference pressure that corresponds to
0 dB. This variable occurs in calculations of the sound pressure level
Lp based on the root mean square (rms) pressure
prms, such that
where pref is the reference pressure and the star (*) represents the complex conjugate. This is an expression valid for the case of harmonically time-varying acoustic pressure
p.
Its accuracy can be influenced by setting the Radiation resolution of the virtual snapshots. The number of z-buffer pixels on each side of the 3D hemicube equals the specified resolution squared. Thus the time required to evaluate the irradiation increases quadratically with resolution. In 2D, the number of z-buffer pixels is proportional to the resolution property, and thus the time is, as well. Visualizing results will be slower when the
Hemicube option is selected.