The Magnet node is used to model one or multiple magnets, simplifying the definition of the magnetization direction in each magnet. In the The Rotating Machinery, Magnetic Interface, this feature is called Nonconducting Magnet.

Select the Direction method to be used for determining the direction of the magnetization in the magnet. Choose between:

This section is only available when Specify north and south boundaries is selected as the Direction method. The setting makes it possible to automatically set the magnetization direction for multiple magnets following a certain pattern. Choose between No pattern, Circular pattern, and Linear pattern (or domain index based). When Circular pattern is selected, the magnetization direction for each pattern element is determined by its position in a circle and a pattern repetition angle. Select Linear pattern (or domain index based) to repeat the definition of the magnetization direction in a selection of magnets that are linearly displaced.

This section is only available when Circular pattern or Linear pattern (or domain index based) is chosen as the Pattern type. The different options are Repeating, Alternating, and User defined. When Repeating is selected, the magnetization direction is the same in each element. Select Alternating to instead have the magnetization direction reversed for each repeated element in the pattern. If the alternating pattern is applied to an odd number of magnets, the north and south boundaries should be specified for the first magnet in the pattern. The User defined option is only available for a circular pattern and allows a custom input that determines how much the magnetization direction should change between each element.

This section is only available when User defined is chosen as the Type of periodicity, when also having Circular pattern as the Pattern type. This angle is added to the magnetization direction for each repetition in the pattern.

This section is only available when Circular pattern is chosen as the Pattern type. It defines the center of the circular pattern.

This section is only available when Circular pattern is chosen as the Pattern type. This setting is only available in 3D, and defines the axis around which the pattern is created.

This section is only available when User defined is selected as the Direction method in the Magnet feature. This input vector is equivalent to the one that can be added when Magnetization is selected in the Magnetic Flux Conservation feature.

This section is identical to the one in the Magnetic Flux Conservation node, apart from that only the options Remanent flux density and Nonlinear permanent magnet are available here.