The Accumulator subnode is available from the context menu (right-click the
Wall,
Outlet,
Periodic Condition or
Axial Symmetry parent node) or from the
Physics toolbar,
Attributes menu. Each
Accumulator subnode defines a variable, called the accumulated variable, on each boundary element in the selection of the parent node. Whenever a particle hits a boundary element, the value of the accumulated variable in that element is incremented based on the value of the user-defined
Source term
R for the incident particle.
Enter the Accumulated variable name. The default is
rpb. The accumulated variable is defined as
<scope>.<name>, where
<scope> includes the name of the physics interface node, parent boundary condition, and the
Accumulator node; and
<name> is the accumulated variable name.
For example, if the Accumulator subnode is added to a
Wall node in an instance of the Mathematical Particle Tracing interface using the default variable name
rpb, the accumulated variable name might be
pt.wall1.bacc1.rpb.
Enter a Source R. The unit of the source term depends on the settings in the
Units section. Whenever a particle collides with a boundary element in the selection of the parent node, the accumulated variable in that element is incremented by the source term. If the
Accumulator type is set to
Density, the source term is divided by the area of the boundary element (in 3D) or the length of the boundary element (in 2D).
Select a Dependent variable quantity from the list; the default is
Dimensionless [1]. To enter a unit, select
None from the list and in the
Unit field enter a value, for example,
K,
m/s, or
mol/m^3.
The accumulated variables are computed using discontinuous shape functions. Select the Compute smoothed accumulated variable check box to compute a smoothed accumulated variable by computing the average value of the variable within a sphere of a user-defined radius. Then enter a
Smoothing radius r (SI unit: m). The default is
0.1 m.