1. J.B. Leblond and J.C. Devaux, “A new kinetic model for anisothermal metallurgical phase transformations in steels including effect of austenite grain size”, Acta Metall., vol. 32, no. 1, pp. 137–146, 1984.

2. D.P. Koistinen and R.E. Marburger, “A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels”, Acta Metall., vol. 7, no. 1, pp. 59–60, 1959.

3. J.B. Leblond, G. Mottet, J. Devaux, and J.C. Devaux, “Mathematical models of anisothermal phase transformations in steels, and predicted plastic behaviour”, Mat. Sci. Tech., vol. 1, no. 10, pp. 815–822, 1985.

4. B. Liscic, H.M. Tensi, L.C.F. Canale, and G.E. Totten (Eds.), Quenching theory and technology, CRC Press, Taylor & Francis Group, 2010.

5. J.B. Leblond, J. Devaux, and J.C. Devaux, “Mathematical modelling of transformation plasticity in steels I: Case of ideal-plastic phases”, Int. J. Plast., vol. 5, pp. 551–572, 1989.

6. J.B. Leblond, “Mathematical modelling of transformation plasticity in steels II: Coupling with strain hardening phenomena”, Int. J. Plast., vol. 5, pp. 573–591, 1989.

7. H.J.M. Geijselaers, Numerical simulation of stresses due to solid state transformations: The simulation of laser hardening, doctoral dissertation, Univ. of Twente, Enschede, 2003.

8. J. Gyhlesten Back, Modelling and characterisation of the martensite formation in low-alloyed carbon steels, licentiate thesis, Luleå Univ. of Technology, Luleå, 2017.

9. S. Boettcher, M. Böhm, and M. Wolff, A comprehensive model of thermo-elasto-plasticity with phase transitions in steel, Zentrum für Technomathematik, Universität Bremen, 2013.

10. J.S. Kirkaldy and D. Venugopalan, Phase Transformations in Ferrous Alloys, Am, Inst. Min. Engg., Philadelphia, Pa 1984.