Hide for Geometry
Use the Hide for Geometry ( feature to hide a set of geometry objects or some of their geometric entities in the created or imported geometry.
To add Hide for Geometry nodes:
•
In the Model Builder, under Definitions click View. In the View toolbar, click Hide, or
•
Right-click the View node and select Hide Geometry Objects.
The Hide for Geometry node hides geometry objects or parts of such objects and affects the view in the Geometry branch as well as the view in the Materials, physics interface, Mesh, studies, and Results branches. The Hide for Physics node hides geometric entities (domains, boundaries, edges, or points) in the finalized geometry and affects the view in the Materials, physics interface, Mesh, studies, and Results branches but not in the Geometry branch.
The Settings window for Hide for Geometry contains the following section:
Selection
Hide a set of geometry objects at a specific Geometric entity level: Object (the default), Domain, Boundary, Edge (3D only), or Point. Then select the geometry objects or some of their geometric entities in the Graphics window. The list under the Geometric entity level list contains the selected objects or entities to hide in the Geometry branch. For example, hide a geometry object, or hide a boundary of a 3D geometry object to make it possible to view the inside of the object. Use the Add to Selection (), Remove from Selection (), Clear Selection (), and Zoom to Selection () buttons as needed. Click the Show Objects in Selection button () at the top of the Settings window to show or hide the selected geometry objects or geometric entities in the Graphics window.