Use an Extrusion 1D (
) or an
Extrusion 2D (
) dataset to extrude data in postprocessing from 1D to 2D and from 2D to 3D, respectively. Using these datasets, you can solve a problem more efficiently in a lower dimension and then extrude it for postprocessing, if the geometry is such that a linear extrusion is suitable.
Use the y minimum and
y maximum (for
Extrusion 1D nodes) or
z minimum and
z maximum (for
Extrusion 2D nodes) fields to define the range of the extrusion.
The value in the Resolution field is the number of layers added. The default is 10 layers; you must use at least 2.
You define the name of the variable in the extrusion direction in the y variable (for
Extrusion 1D nodes) or
z variable (for
Extrusion 2D nodes) field. For the extrusion datasets, you can use the extrusion variable in the expressions that are being evaluated.
Under Embedding (
Extrusion 2D nodes only), specify the extrusion direction using the
Map plane to list, where you can choose
xy-plane (the default),
xz-plane, or
yz-plane.