Use a Spherical System () to define a spherical coordinate system in 3D by its origin, zenith axis, and azimuth axis.

The coordinates of a local spherical coordinate system are (r, θ, ), where r represents the radial distance from the origin, θ is the inclination (in the interval from 0 to π), and is the azimuthal angle (in the interval from −π to π). Specify — in terms of the global Cartesian coordinates x, y, and z — the position of the origin, the axis θ = 0 (the zenith axis, Z), and the axis θ = π/2,  = 0 (the azimuth axis, A). The direction vectors are automatically normalized.

where ro is the position of the origin, Z is a unit vector along the axis θ = 0, and the component of r − ro in the plane θ = π/2 is

If this coordinate system is added as a subnode to a Combined System node, define where it will be active using a selection in the Geometric Entity Selection section. Also, the Name and Coordinate names fields and the Frame list are not available in this case.

The Frame list is the same as for the Cylindrical System.

In the Coordinate names table, the default Coordinate names are entered — r, theta, and phi.

Enter the location of the Origin in the global Cartesian coordinate system. The default is an origin coinciding with that of the global system.

Enter the Direction of axis θ=0 (the zenith axis). The default axis direction is the z direction in the global Cartesian system.

Define the Direction of axis θ=π/2, =0 (the azimuth axis). The default direction is the x direction in the global Cartesian system.

From the Work plane list, select xy-plane (the default, for a standard global Cartesian coordinate system) or select any work plane in the geometry sequence. If you choose a work plane, the work plane’s coordinates xw, yw, and zw are used for the definition of the origin and axis.