Cluster Installation

COMSOL Multiphysics supports two mutual modes of parallel operation: shared-memory parallel operations and distributed-memory parallel operations, including cluster support. This section is dedicated to distributed-memory parallel installation.

COMSOL Multiphysics can distribute computations on compute clusters using the MPI model. One large problem can be distributed across many compute nodes. Also, parametric sweeps can be distributed with individual parameter cases distributed to each cluster node.

Prerequisites

The cluster installation instruction assume that you have a fully operational and tested Windows cluster with the Windows HPC Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, or Windows Server 2019 operating system and that you area a fully qualified system administrator, with administration access rights to the cluster head node and compute nodes. In addition, Windows HPC Pack is required on Windows Server versions.

license manager

COMSOL Multiphysics requires a Floating Network License for running on clusters. Please check the license file for the CLUSTERNODE feature, which needs to be present to enable the cluster computing functionality. The license manager needs to be accessible from all nodes in the cluster. Therefore it is often a good idea to have it run on the head node.

installation folder

The COMSOL Multiphysics installation folder should be shared between all compute nodes and the head node. The installation of the COMSOL software is only needed on the head node. Alternatively, the software can be installed on C:\ on each compute node. Typically, the installation directory is accessed through a UNC (uniform naming convention) path on the Windows private network that is only seen by the compute nodes that belong to the cluster.

Installation Procedure

In addition to the normal installation steps as outlined under Installing on Windows, this section includes specific information for cluster installations.

During installation, on the page (see Products Page) make sure that you select the check box in the list under .

For the installation directory that you specify in the text field, remember to share the installation directory with the compute nodes after installation.

If you installed COMSOL Multiphysics on a shared directory, you need to install Microsoft Visual Studio® runtime libraries on each compute node. (See www.comsol.com/support/knowledgebase/1083/ for instructions.)

access to cluster (windows server only)

If you work on a desktop PC, install COMSOL on that PC. Before you start, you need to install Windows HPC Pack on the PC. This software is free and enables you to access the cluster from your PC.

Checking the Installation

After the cluster installation has finished, make the following checks to make sure that the installation is working:

•

Make sure that the COMSOL installation directory is shared between all the compute nodes and the head node on a shared network disk.

•

Make sure that the license manager is reachable from all compute nodes.

If you have firewalls activated, open any relevant TCP ports for the license check from the nodes.

For more information, see www.comsol.com/support/knowledgebase/903/

•

To check that a node is OK, open a remote desktop session to the compute node, then start \\headnode\COMSOL\bin\win64\comsol.exe (assuming \\headnode\COMSOL is the shared installation directory). If the COMSOL Desktop starts without license errors, the license management works fine. If not, check the firewall (see above). If you get other errors, you may need to install runtime libraries on the compute nodes.

For more information on installing and running COMSOL Multiphysics on clusters, see Running COMSOL Multiphysics on Clusters and the COMSOL Multiphysics Reference Manual.