TubeData
Create a tube data plot.
Syntax
model.result(<pgtag>).create(<ftag>,"TubeData");
model.result(<pgtag>).feature(<ftag>).set(property, <value>);
model.result(<pgtag>).feature(<ftag>).run();
Description
model.result(<pgtag>).create(<ftag>,"TubeData") creates a tube data plot feature named <ftag> belonging to the 2D or 3D plot group <pgtag>.
Tube data plots are used to visualize raw point data given as points, elements, and colors as tubes (see the examples below). Tube data plots can be added to 2D and 3D plot groups.
The following properties are available:
Table 7-148: Valid Property/Value Pairs for Tube Data Plots
name
Value
Default
Description
bottomcolor
custom | black | blue | cyan | gray | green | magenta | red | white | yellow
black
The bottom color to use for a color gradient. Active when coloring is gradient.
color
custom | black | blue | cyan | gray | green |magenta | red | white | yellow
red
The uniform color to use. Active when coloring is uniform.
colordata
double 1D array
 
The color data for the tube data plot as a real N-vector.
coloring
colortable | uniform | gradient
colortable
How to color the tubes: using a color table, a uniform color, or a color gradient.
colorlegend
on | off
on
Whether to show color legend when coloring is set to colortable.
colorscalemode
linear | linearsymmetric | logarithmic
linear
Scaling of the color table: linear, linear symmetric around 0, or logarithmic, when coloring is set to colortable or gradient.
colortable
color table name
Rainbow
The color table to use when coloring is set to colortable. See Color Tables for a list of color tables.
colortabletrans
none | reverse | nonlinear | nonlinearsymmetric
none
Transformation of the color table, when coloring is set to colortable or gradient.
custombottomcolor
RGB-triplet
{1,0,0} or last used color.
The uniform color to use. Active when bottomcolor is set to custom.
customcolor
RGB-triplet
{1,0,0} or last used color.
The uniform color to use. Active when color is set to custom.
customtopcolor
RGB-triplet
{1,0,0} or last used color.
The uniform color to use. Active when topcolor is set to custom.
nonlinearcolortablerev
on | off
off
Whether to reverse to color table or gradient when coloring is set to colortable or gradient and colortabletrans is set to nonlinear or nonlinearsymmetric.
pointdata
double 2D array
 
The point data for the tube data plot, as x and y coordinates in 2D and x, y, and z coordinates in 3D in an sdim-by-N real matrix.
radiusdata
double 1D array
 
The radius data for the tube data plot as a real N-vector or a single double value for a fixed tube radius.
rangecoloractive
on | off
off
Whether to use the manual color range specified in rangecolormin and rangecolormax. The color range specifies the minimum and maxim value in the plotted colors. Default is the minimum and maximum data values.
rangecolormax
double
Plot-dependent
The maximum color range value. Active when rangecoloractive is on.
rangecolormin
double
Plot-dependent
The minimum color range value. Active when rangecoloractive is on.
rangedatactive
on | off
off
Whether to use the manual data range specified in rangedatamin and rangedatamax. Values outside the data range are not plotted.
rangedatamax
double
Plot-dependent
The maximum data value. Active when rangedataactive is on.
rangedatamin
double
Plot-dependent
The minimum data value. Active when rangedataactive is on.
title
String
The auto-title.
The title to use when titletype is manual.
titletype
auto | label | manual | none
auto
auto, if the title should be computed automatically. label, if the title should be the plot group’s label. manual, if the manual title should be used (the title property). none, if no title should be displayed.
topcolor
custom | black | blue | cyan | gray | green | magenta | red | white | yellow
white
The top color to use for a color gradient. Active when coloring is gradient.
Attributes
None.
Examples
A method for creating a logarithmic tube spiral in 2D:
Code for Use with Java
String pgTag = model.result().uniquetag("pg");
ResultFeature pg = model.result().create(pgTag, 2);
ResultFeature plot = pg.create("tube1", "TubeData");
int N = 100;
double[][] p = new double[2][N];
double[] radius = new double[N];
for (int i = 0; i < N; i++) {
double par = 0.05*i;
p[0][i] = Math.exp(par)*Math.cos(3*par);
p[1][i] = Math.exp(par)*Math.sin(3*par);
radius[i] = 0.3;
}
plot.set("pointdata", p).set("radiusdata", radius);
A method for creating a logarithmic tube spiral in 3D:
Code for Use with Java
String pgTag = model.result().uniquetag("pg");
ResultFeature pg = model.result().create(pgTag, 3);
ResultFeature plot = pg.create("tube1", "TubeData");
int N = 1000;
double[][] p = new double[3][N];
double[] radius = new double[N];
double[] color = new double[N];
for (int i = 0; i < N; i++) {
double par = 0.005*i;
p[0][i] = Math.exp(par)*Math.cos(10*par);
p[1][i] = Math.exp(par)*Math.sin(10*par);
p[2][i] = 0.1*i;
radius[i] = 0.2*Math.sqrt(i+1);
color[i] = i;
}
plot.set("pointdata", p)
.set("radiusdata", radius)
.set("colordata", color)
.set("coloring", "colortable");
See Also
AnnotationData, ArrowData, LineData, PointData, SurfaceData