|
|
|
on | off
|
|||
|
Scaling of the color table: linear, linear symmetric around 0, or logarithmic, when coloring is set to colortable or gradient.
|
|||
|
The color table to use when coloring is set to colortable. See Color Tables for a list of color tables.
|
|||
|
{1,0,0} or last used color.
|
|||
|
{1,0,0} or last used color.
|
|||
|
{1,0,0} or last used color.
|
|||
|
The description of the expression in expr. It is used in the automatic title.
|
|||
|
on | off
|
|||
|
on | off
|
Whether the expression should be linearized at the linearization point. Applicable only if evalmethod is harmonic.
|
||
|
on | off
|
|||
|
Vector of distances from base plane, indicating position of additional parallel planes. Active when genparaactive equals on and genpara equals number.
|
|||
|
threepoint | pointnormal
|
Active when planetype equals general, this property indicates whether the plane should be specified by three points or through one point and a normal.
|
||
|
Number of additional parallel planes. Active when genparaactive equals on and genpara equals number.
|
|||
|
gennumber | gendistances
|
Active when planetype equals general, and genparaactive equals on, this property indicates whether the additional parallel planes should be specify by a number or by a vector of relative distances.
|
||
|
on | off
|
Active when planetype equals general, this property indicates whether there should be additional parallel planes created.
|
||
|
Active when genmethod equals threepoint, this property contains the coordinates of the three points, with one row per point.
|
|||
|
none | plot name
|
|||
|
on | off
|
|||
|
Time corresponding to last selected solnum for transient levels.
|
The time to use, for transient levels. Available when data is not parent and the underlying data is transient.
|
||
|
The index of the solution to use, per level, or interp, but only for transient solutions. Available when data is not parent and the underlying data has multiple solutions.
|
|||
|
on | off
|
Whether to reverse to color table or gradient when coloring is set to colortable or gradient and colortabletrans is set to nonlinear or nonlinearsymmetric.
|
||
|
quick | general
|
|||
|
number | coord
|
Active when planetype equals quick and quickplane equals yz, this property indicates whether the planes should be specified by one or more absolute coordinates along the x-axis, or a number indicating the number of planes to distribute evenly.
|
||
|
The number of planes when quickxmethod is set to number. It can contain a global expression for the number of slices.
|
|||
|
number | coord
|
Active when planetype equals quick and quickplane equals zx, this property indicates whether the planes should be specified by one or more absolute coordinates along the y-axis, or a number indicating the number of planes to distribute evenly.
|
||
|
The number of planes when quickymethod is set to number. It can contain a global expression for the number of slices.
|
|||
|
number | coord
|
Active when planetype equals quick and quickplane equals xy, this property indicates whether the planes should be specified by one or more absolute coordinates along the z-axis, or a number indicating the number of planes to distribute evenly.
|
||
|
The number of planes when quickzmethod is set to number. It can contain a global expression for the number of slices.
|
|||
|
on | off
|
Whether to use the manual color range specified in rangecolormin and rangecolormax. The color range specifies the minimum and maxim value in the plotted colors. Default is the minimum and maximum data values.
|
||
|
on | off
|
Whether to use the manual data range specified in rangedatamin and rangedatamax. Values outside the data range is not plotted.
|
||
|
The element refinement to use, if resolution is set to manual. Bear in mind that this is the refinement used for the base dataset, so the number of elements in the model can increase radically if the plot uses, for example, a revolve dataset.
|
|||
|
Controls the plot’s resolution. A finer setting results in a higher resolution by modifying the internally computed default refinement. Use custom to enter your own refinement in the refine property.
|
|||
|
Smoothing settings. With material, smoothing is done inside domains with the same material. With internal, smoothing is done inside geometry domains. With expression, the smoothing is based on the expression in smoothexpr.
|
|||
|
The index of the solution to use. Available when data is not parent and the underlying data has multiple solutions.
|
|||
|
solnum | solutioninfo
|
|||
|
manual | parent
|
If data is a local dataset with nontrivial data, specify solutions manually or take them from the parent plot group.
|
||
|
The time to use, for transient problems. Available when data is not parent and the underlying data is transient.
|
|||
|
manual | none
|
|||
|
on | off
|
|||
|
auto, if the title should be computed automatically. custom, if the title should be computed automatically, but customized. label, if the title should be the plot group’s label. manual, if the manual title should be used (the title property). none, if no title should be displayed.
|
|||
|
on | off
|
|||
|
The unit to use for the expression in expr. If the old unit is not valid when the expression changes, the unit property is reset to default.
|
|||
|
on | off
|