LineGraph
Create a line graph plot.
Syntax
model.result(<pgtag>).create(<ftag>,"LineGraph");
model.result(<pgtag>).feature(<ftag>).selection(...);
model.result(<pgtag>).feature(<ftag>).set(property, <value>);
model.result(<pgtag>).feature(<ftag>).run();
Description
model.result(<pgtag>).create(<ftag>,"LineGraph") creates a line graph plot feature named <ftag> belonging to the plot group <pgtag>.
A line graph plot is used to visualize quantities on lines, either cut lines or boundaries (2D) and edges (3D) in a geometry. Line graph plots can be added to 1D plot groups.
The following properties are available:
on | off
on | off
on | off
on | off
{0,0,1} or last used edgecolor.
none | parent | dataset name
The description of the expression in expr. Is used in the automatic title.
on | off
on | off
linpoint | harmonic | lintotal | lintotalavg | lintotalrms | lintotalpeak
on | off
all | first | last | manual | manualindices | interp
How to input the solution to use. manual indicates that solnum is used. manualindices indicates that solnumindices is used. interp indicates that t is used.
The times to use, for transient levels. Available when data is not parent and the underlying data is transient.
on | off
The precision for the evaluated expression when legendmethod is set to evaluated.
automatic | manual | evaluated
A legend string to be evaluated when legendmethod is set to evaluated.
Manual legends active when legendmethod is set to manual.
custom | cycle | cyclereset | fromtheme | black | blue | cyan | gray | green | magenta | red | white | yellow
none | cycle | asterisk | circle | diamond | plus | point | square | star | triangle
The local z-coordinates, when locdef is set to physical.
The local relative z-coordinates, when locdef is set to relative.
reference | physical | relative
All solutions on all levels
An alternative way to specify the solutions to use, allowing you to enter, for example, range(1,1,20). Applicable when looplevelinput is manualindices on a level.
String array with all | first | last | manual | manualindices | interp on each level
all on all levels
How to input the solution to use, per level. manual on a level indicates that looplevel is used on that level. manualindices on a level indicates that looplevelindices is used on that level. interp on a level indicates that interp is used on that level.
interp | datapoints
none | cycle | solid | dotted | dashed | dashdot
all | first | last | manual | manualindices
How to input the outer solutions to use. Applicable only for parametric sweep models. manual indicates that outersolnum is used. manualindices indicates that outersolnumindices is used.
Plot on secondary y-axis, if twoyaxes is set to true in the parent plot group.
The element refinement to use, if resolution is set to manual. Bear in mind that this is the refinement used for the base dataset, so the number of elements in the model can increase radically if the plot uses, for example, a revolve dataset.
norefine | coarse | normal | fine | finer | extrafine | custom
The solutions to plot. Available when data is not parent and the underlying data has multiple solutions.
An alternative way to specify the solutions to use, allowing you to enter, for example, range(1,1,20). Applicable when innerinput is manualindices.
solnum | solutioninfo
manual | parent
If data is a local dataset with nontrivial data, specify solutions manually or take them from the parent plot group.
The times to plot. Available when data is not parent and the underlying solution is transient.
The title to use when titletype is manual.
auto | custom | label | manual | none
auto, if the title should be computed automatically. custom, if the title should be computed automatically, but customized. label, if the title should be the plot group’s label. manual, if the manual title should be used (the title property). none, if no title should be displayed.
on | off
The unit to use for the expression in expr. If the old unit is not valid when the expression changes, the unit property is reset to default.
on | off
arc | reversedarc | spacevar | expr
x-axis data. expr uses the expression in xdataexpr. arc uses the curve’s arc length, reversedarc uses the arc length measured from the curve’s endpoint, and spacevar uses the space variable from the dataset specified with the data property.
The unit to use for the expression in xdataexpr. If the old unit is not valid when the expression changes, the unit property is reset to default.
Attributes
Color, Filter (Plot Attribute)
See Also
Line