LayeredMaterialSlice
Create a layered material slice plot.
Syntax
model.result(<pgtag>).create(<ftag>,"LayeredMaterialSlice");
model.result(<pgtag>).feature(<ftag>).set(property, <value>);
model.result(<pgtag>).feature(<ftag>).run();
Description
model.result(<pgtag>).create(<ftag>,"LayeredMaterialSlice") creates a layered material slice plot feature named <ftag> belonging to the plot group <pgtag>.
A layered material slice plot displays a layered material quantity on a slice created at a specified through-thickness location in 2D or 3D.
The following properties are available:
custom | black | blue | cyan | gray | green | magenta | red | white | yellow
custom | black | blue | cyan | gray | green | magenta | red | white | yellow
colortable | uniform | gradient
on | off
Whether to show color legend, when coloring is set to colortable.
linear | linearsymmetric | logarithmic
The color table to use when coloring is set to colortable. See Color Tables for a list of color tables.
none | reverse | nonlinear | nonlinearsymmetric
Transformation of the color table, when coloring is set to colortable or gradient.
{1,0,0} or last used color.
The uniform color to use. Active when bottomcolor is set to custom.
{1,0,0} or last used color.
{1,0,0} or last used color.
The uniform color to use. Active when topcolor is set to custom.
none | parent | dataset name
The description of the expression in expr. It is used in the automatic title.
on | off
on | off
linpoint | harmonic | lintotal | lintotalavg | lintotalrms | lintotalpeak
on | off
If inheritplot is not none: Determines if the color is inherited.
If inheritplot is not none: Determines if the deformation scale is inherited.
none | plot name
If inheritplot is not none: Determines if the color and data ranges are inherited.
Time corresponding to last selected solnum for transient levels.
The time to use, for transient levels. Available when data is not parent and the underlying data is transient.
The local z-coordinates, when locdef is set to physical.
The local relative z-coordinates, when locdef is set to relative.
reference | physical | relative | interfaces | layermidplanes
The index of the solution to use, per level, or interp, but only for transient solutions. Available when data is not parent and the underlying data has multiple solutions.
on | off
Whether to reverse to color table or gradient when coloring is set to colortable or gradient and colortabletrans is set to nonlinear or nonlinearsymmetric.
x | y | z | diagonal
x (in 2D); z (in 3D)
The orientation for the linear displacement, when slicedisplacement is set to linear. In 2D, only x and y are available.
xy | yz | zx | yx | zy | xz
The orientation for the rectangular displacement, when slicedisplacement is set to rectangular. In 2D, only xy and yx are available.
on | off
Whether to use the manual color range specified in rangecolormin and rangecolormax. The color range specifies the minimum and maxim value in the plotted colors. Default is the minimum and maximum data values.
on | off
Whether to use the manual data range specified in rangedatamin and rangedatamax. Values outside the data range is not plotted.
off | pprint | ppr
The element refinement to use, if resolution is set to manual. Bear in mind that this is the refinement used for the base dataset, so the number of elements in the model can increase radically if the plot uses, for example, a revolve dataset.
norefine | coarse | normal | fine | finer | extrafine | custom
true | false
none | linear | rectangular
none | material | internal | everywhere | expression
Smoothing settings. With material, smoothing is done inside domains with the same material. With internal, smoothing is done inside geometry domains. With expression, the smoothing is based on the expression in smoothexpr.
The expression to use for smoothing when smooth is set to expression.
The index of the solution to use. Available when data is not parent and the underlying data has multiple solutions.
solnum | solutioninfo
manual | parent
If data is a local dataset with nontrivial data, specify solutions manually or take them from the parent plot group.
The time to use, for transient problems. Available when data is not parent and the underlying data is transient.
manual | none
Threshold value (0-1), if threshold is set to manual.
on | off
on if t is used to determine time steps; off if solnum is used.
The title to use when titletype is manual.
auto | custom | label | manual | none
auto, if the title should be computed automatically. custom, if the title should be computed automatically, but customized. label, if the title should be the plot group’s label. manual, if the manual title should be used (the title property). none, if no title should be displayed.
custom | black | blue | cyan | gray | green | magenta | red | white | yellow
on | off
The unit to use for the expression in expr. If the old unit is not valid when the expression changes, the unit property is reset to default.
on | off
on | off
Attributes
Deform, Filter (Plot Attribute), MaterialAppearance, Selection, Translation, Transparency (3D only)
See Also
Surface (Plot)