Automatic Rebuild

The autoRebuild setting is a GUI setting which controls if the mesh sequence is automatically rebuilt when clicking a node in the model tree outside the mesh sequence where the mesh is used. You can change it by entering:

model.component(<ctag>).mesh(<tag>).autoRebuild(<newAutoRebuild>);

where <newAutoRebuild> is on or off. The setting will only be available in the GUI and have effect if the mesh <tag> defines its own geometric model and the physics is defined on this geometric model. To control on which geometric model to define the physics, use:

model.component(<ctag>).definedByMesh(<tag>);

where <tag> corresponds to the same mesh as for autoRebuild.