Scale

model.component(<ctag>).geom(<tag>).create(<ftag>,"Scale");

model.component(<ctag>).geom(<tag>).feature(<ftag>).selection(property);

model.component(<ctag>).geom(<tag>).feature(<ftag>).set(property,<value>);

model.component(<ctag>).geom(<tag>).feature(<ftag>).getType(property);

model.component(<ctag>).geom(<tag>).feature(<ftag>).setAttribute(attribute,<value>);

model.component(<ctag>).geom(<tag>).feature(<ftag>).getAttribute(attribute);

Use model.component(<ctag>).geom(<tag>).create(<ftag>,"Scale") to scale geometry objects.

Use model.component(<ctag>).geom(<tag>).feature(<ftag>).selection("input") to select the objects to scale. The default selection is empty.

Table 3-151: Valid Properties for Scale
Name	Value	Default	Description
color	none \| custom \| integer between 1 and the number of colors in the current theme	none	The color of the selection, either given as an integer indicating a color in the color theme, or as a custom color in the customcolor property. Coloring is only available when selresult in active.
contributeto	String	none	Tag of cumulative selection to contribute to.
customcolor	RGB-triplet	Next available theme color	The color to use. Active when color is set to custom.
factor	double \| double[]	1	Scale factor(s).
input	Selection		Objects to scale.
keep	on \| off	off	Keep input objects.
pos	double[]	0	Center of scaling.
selresult	on \| off	off	Create selections of all resulting objects.
selresultshow	all \| obj \| dom \| bnd \| edg \| pnt \| off	dom	Show selections, if selresult is on, in physics, materials, and so on; in part instances; or in 3D from a plane geometry. obj is not available in a component’s geometry. dom, bnd, and edg are not available in all features.
workplanesrc	this \| Part Instance feature	this	Part Instance feature to take the work plane from (in 3D only).
workplane	xyplane \| Work plane feature	xyplane	Work Plane feature that defines the coordinate system (in 3D only). The default, xyplane, is the global Cartesian coordinate system.

If factor is an array, the inputs are scaled by the factor[i] in the ith coordinate.

Table 3-152: Valid attributes
Name	Value	Default	Description
construction	on \| off \| inherit	inherit	Designate the resulting objects as construction geometry. Use inherit to set the construction geometry attribute only if all input objects are construction geometry.