•
|
For Acoustic Boundary condition-absolute elongation enter a Border elongation ΔL (SI unit: m). The default is 0.1 μm.
|
•
|
For Acoustic boundary condition-relative elongation enter a Relative border elongation ΔLr (dimensionless). The default is 0.7.
|
•
|
For Out-of-plane motion enter the Model coefficients η, ζ, χ with defaults 0, 0, 1, respectively. Also enter the Slip length, Λ (SI unit: m). The default slip length uses an if condition to set the slip length equal to that defined in the Fluid-Film Properties node if a suitable Film flow model is selected. If the Slip length is not defined in the Fluid-Film Properties node, it defaults to 0.1μm.
|
•
|