This node adds the bioheat equation as the mathematical model for heat transfer in biological tissue. This equation can include source terms representing blood perfusion and metabolism using Pennes’ approximation, through the addition of a Bioheat subnode; see Equation 4-37. Optionally a damage model can be defined to take into account overheating or freezing in tissues, by adding a Thermal Damage subnode.

This section is available when a temperature-dependent density defined in a material is used. On the material frame, the density is evaluated in relation to a reference temperature in order to ensure conservation of the mass in the presence of temperature variations. By default the Common model input is used. This corresponds to the variable minput.Tempref, which is set to 293.15 K by default. To edit it, click the Go to Source button (), and in the Default Model Inputs node under Global Definitions, set a value for the Volume reference temperature in the Expression for remaining selection section.

The other options are User defined and all temperature variables from the physics interfaces included in the model.

This section is available when material properties are temperature-dependent. By default, the temperature of the parent interface is used and the section is not editable. To edit the Temperature field, click Make All Model Inputs Editable (). The available options are User defined (default), Common model input (the minput.T variable, set to 293.15 K by default) and all temperature variables from the physics interfaces included in the model. To edit the minput.T variable, click the Go to Source button (), and in the Default Model Inputs node under Global Definitions, set a value for the Temperature in the Expression for remaining selection section.

The default Thermal conductivity k uses values From material. For User defined select Isotropic, Diagonal, Symmetric, or Full based on the characteristics of the thermal conductivity and enter another value or expression in the field or matrix.

The default Density ρ and Heat capacity at constant pressure Cp are taken From material. See Material Density in Features Defined in the Material Frame if a temperature-dependent density should be set.

For User defined enter other values or expressions.

Physics Tab with Heat Transfer in Solids and Fluids, Heat Transfer in Solids, Heat Transfer in Fluids, Heat Transfer in Porous Media, Heat Transfer in Building Materials or Bioheat Transfer selected: