Use a Point Graph () to visualize the value in a point along time or a parameter value. It can be a point in the geometry or a cut point. Add a Color Expression or Filter subnode as needed. Right-click a 1D Plot Group or Polar Plot Group to add this plot type.

Select Manual from the Selection list to choose geometry directly from the Graphics window. Select All to add the applicable geometry or any other predefined grouping.

Select the Plot on secondary y-axis check box to plot the y-axis data on the secondary y-axis to the right of the plot instead of the primary y-axis to the left of the plot.

This section is only available when the dataset refers to a solution using a time-dependent study. You can then increase the time resolution if needed for a smooth graph plot. In the Refinement list, enter an integer between 1 (the default value) and 1000. For an increased time resolution, enter a higher refinement value.

Select the Show legends check box to display the plotted expressions to the right of the plot. In plots where each line represents a certain time value, eigenvalue, or parameter value, these values are also displayed. For 1D point plots, the legend displays the coordinate (or vertex number).

When Automatic is selected from the Legends list (the default), select or clear the Description, Expression, and Unit check boxes to control what to include in the automatic legends (by default, it includes the description only). You can also add a prefix or a suffix to the automatic legend text in the Prefix and Suffix fields. If Manual is selected from the Legends list, enter your own legend text into the table.