Line Graph
Use a Line Graph () to plot a scalar quantity along a geometric line. The line can be an edge in the geometry, a parameterized curve, or a cut line. Make a graph plot of a quantity versus another quantity (for example, time). Add a Color Expression or Filter subnode as needed. Right-click a 1D Plot Group or Polar Plot Group to add this plot type.
Go to Common Results Node Settings for links to information about these sections: Data, y-Axis Data (or r-Axis Data), Title, Coloring and Style, and Quality.
Selection (Solution Datasets Only)
When Solution is selected as a Dataset, this section displays. Select Manual from the Selection list to choose geometry directly from the Graphics window. Select All to add the applicable geometry or any other predefined grouping.
y-Axis
This section is only available if the Two y-axes check box is selected in the Plot Settings section of the parent 1D Plot Group node’s Settings window.
Select the Plot on secondary y-axis check box to plot the y-axis data on the secondary y-axis to the right of the plot instead of the primary y-axis to the left of the plot.
X-Axis Data or θ Angle Data
For Parametric Sweep studies, for each pair of outer solutions or inner solutions, one line is plotted on the graph. For example, if there are 10 outer solutions and each outer solution has five inner solutions, then 50 lines are drawn. The number of inner solutions can vary between outer solutions.
Select Arc length or Reversed arc length from the Parameter list to visualize along an arc length in the direction of the arc or the reversed direction of the arc, respectively, or select Expression to visualize along, for example, a coordinate expression. If Expression is selected, go to Expressions and Predefined Quantities.
Legends
Select the Show legends check box to display the plotted expressions to the right of the plot. In plots where each line represents a certain time value, eigenvalue, or parameter value, these values are also displayed.
When Automatic is selected from the Legends list (the default), select or clear the Description, Expression, and Unit check boxes to control what to include in the automatic legends (by default, it includes the description only). You can also add a prefix or a suffix to the automatic legend text in the Prefix and Suffix fields. If Manual is selected from the Legends list, enter your own legend text into the table.