Name of the controlling study step or "user" if the feature is controlled manually.

Setting this property to on the initial damping factor is used for all parameter steps.

Setting this property to on enables the use of the properties pinitstep, pmaxstep, and pminstep.

Initial step size for parameter. See paramtuning.

List of parameter values. Obsolete, use plistarr instead.

For pcontinuationmode=manual this is one of the parameter names from pname.

Parametric values loop order. If set to auto, a more efficient loop order is used if possible.

Maximum step size for parameter. See paramtuning.

Minimum step size for parameter. See paramtuning.

plist | psteps

Output either the parameters in plist or the solution at the expansion points.

Method for doing the parameter variation. For sweeptype=sparse, the parameter tuples defined by the columns in plistarr are solved for. This method requires equal length for the rows. For sweeptype=filled, all parameter combinations given by plistarr are solved for.