The bottom color to use for a color gradient. Active when coloring is gradient.

The uniform color to use. Active when coloring is uniform.

Whether to show color legend, when coloring is set to colortable.

The color table to use when coloring is set to colortable. See Color Tables for a list of color tables.

Whether to reverse to color table or color gradient when coloring is set to colortable or gradient.

Whether to symmetrize the color range around 0 when coloring is set to colortable or gradient.

The uniform bottom color to use. Active when bottomcolor is set to custom.

The uniform color to use. Active when color is set to custom.

The uniform top color to use. Active when topcolor is set to custom.

For tables with filled data, datacol controls which data column should be used to populate the filled table.

The format of the table data. The default value depends on the table data: Filled table if the data in the table is structurally filled; otherwise, columns if the table contains at least three columns; otherwise, cells. For evaluation groups, filledtable is not available.

For tables with filled data, descr controls which description to use for the columns, in addition to the parameter values. none gives no description, manual uses the description in descrmanual, and data uses the description in the table data.

Manual column header for tables with filled data, used when descr is set to manual.

The evaluation group feature this plot refers to, if source is evaluationgroup.

For tables with filled data, filterstringdata controls whether to filter the input column using showrowstep.

Controls whether you retrieve all or filled table data when calling the getTableData method.

If transform is none: When on, the imaginary part of the data in the table is plotted.

If inheritplot is not none: Determines if the color is inherited.

If inheritplot is not none: Determines if height scale is inherited.

If inheritplot is not none: Determines if the color and data ranges are inherited.

For tables with filled data containing more than two parameters, param is the index indicating which values to use for fixing additional parameters. Additional parameters are ordered from left to right in the original table data.

table | manual

For tables with filled data containing more than two parameters, plotdata controls whether to use manual settings in the plot (table row, column, and so forth), or the filled settings in the table feature. In the latter case, the table’s properties are automatically synchronized with the plot’s properties.

Whether to use the manual color range specified in rangecolormin and rangecolormax. The color range specifies the minimum and maxim value in the plotted colors. Default is the minimum and maximum data values.

The maximum color range value. Active when rangecoloractive is on.

The minimum color range value. Active when rangecoloractive is on.

Whether to use the manual data range specified in rangedatamin and rangedatamax. Values outside the data range is not plotted.

The maximum data value. Active when rangedataactive is on.

The minimum data value. Active when rangedataactive is on.

When retrieving filled data using the getTableData method, showrowstep controls whether to leave all but every showrowstep input cells empty, for example, every third cell in the first column. This refers to the input column only. Only applied when filterstringdata is on.

Smoothing settings. With material, smoothing is done inside domains with the same material. With internal, smoothing is done inside geometry domains. With expression, the smoothing is based on the expression in smoothexpr.

The expression to use for smoothing when smooth is set to expression.

The table feature this plot refers to, if source is table.

Threshold value (0–1), if threshold is set to manual.

The title to use when titletype is manual.

The top color to use for a color gradient. Active when coloring is gradient.

For tables with filled data, xaxisdata controls which parameter is used on the x-axis.

For tables with filled data, yaxisdata controls which parameter is used on the y-axis. Cannot be the same parameter as in xaxisdata.