CompositeDomains

model.component(<ctag>).geom(<tag>).create(<ftag>,"CompositeDomains");

model.component(<ctag>).geom(<tag>).feature(<ftag>).selection(property);

model.component(<ctag>).geom(<tag>).feature(<ftag>).set(property,<value>);

model.component(<ctag>).geom(<tag>).feature(<ftag>).getType(property);

Use model.component(<ctag>).geom(<tag>).create(<ftag>,"CompositeDomains") to form composite domains.

Use model.component(<ctag>).geom(<tag>).feature(<ftag>).selection("input") to select the domains to composite. The default selection is empty.

Table 3-39: Valid Properties
Name	Value	Default	Description
ignoreadj	on \| off	on	Ignore edges (3D only) and vertices on boundary.
input	Selection		Edges to composite.
keepformesh	on \| off	off	Keep input domains for mesh control.

Use ignoreadj to specify if the feature also removes the ignorable edges (3D only) and vertices on the boundary of each resulting composite domain.

Use keepformesh to keep the input domains while meshing, to help you in constructing the mesh.