Mullins Effect
Use the Mullins effect subnode to define the properties for modeling the stress-softening phenomenon under cyclic loading. The Mullins effect can be used together with Hyperelastic Material.
Shell Properties

 
This section is only present when Mullins effect is used as a subnode to Hyperelastic Material is used in the Layered Shell interface. See the documentation for the Mullins Effect node in the Layered Shell chapter.
Mullins Effect
The Damage function defines the model for Mullins effect. Select Ogden-Roxburgh or Miehe.
For Ogden-Roxburgh enter the following settings:
•
Maximum damage d∞.The default is 1.
•
Damage saturation Wsat. The default is 1 MJ/m3.
•
Deformation dependence coefficient α. The default is 0.
For Miehe enter the following settings:
•
Maximum damage d∞.The default is 1.
•
Damage saturation Wsat. The default is 1 MJ/m3.
Location in User Interface
Context Menus
Solid Mechanics>Hyperelastic Material>Mullins Effect
Layered Shell>Hyperelastic Material>Mullins Effect
Membrane>Hyperelastic Material>Mullins Effect
Ribbon
Physics tab with Hyperelastic Material node selected in the model tree:
Attributes>Mullins Effect