Roller, Interface

Use the node to add a roller constraint as boundary condition to one of the faces of the shell. The displacement is zero in the direction perpendicular (normal) to the boundary, but the boundary is free to move in the tangential direction.

To apply a roller conditions on the boundaries formed by the edge of the shell, use Roller.

Shell Properties

Select the interface or interfaces at which the constraint is to be applied.

Table 6-36: Interface Selections; Prescribed Acceleration, Interface
Selection	Apply To	Selection of Individual Interfaces
Boundary	When added: Exterior interfaces.	When Selected Interfaces is selected. Only exterior interfaces can be selected.

•

All other settings for the node are described in the documentation for Roller in the Solid Mechanics interface.

•

For a general description of layer and interface selections, see The Shell Properties and Interface Selection Sections.

Location in User Interface

Context Menus

Ribbon

Physics tab with selected: