Fixed Constraint, Interface
Use the Fixed Constraint, Interface to add a condition where the displacements constrained in all directions at interfaces between material layers in the selected geometric entity.
To constrain the actual material layers, use Fixed Constraint.
Interface Selection
Select the interface or interfaces for which this constraint is to be added.
Table 6-32: Interface Selections; Prescribed Displacement, Interface
Selection
Apply To
Selection of Individual Interfaces
Boundary
When added: Exterior interfaces.
When Selected Interfaces is selected.
Only exterior interfaces can be selected.
Edge, Point
When added: Top interface.
When Selected Interfaces is selected.
Any interface can be selected.
•
All other settings for the Fixed Constraint, Interface node are described in the documentation for Fixed Constraint in the Solid Mechanics interface.
•
For a general description of layer and interface selections, see The Shell Properties and Interface Selection Sections.
Location in User Interface
Context Menus
Layered Shell>Face and Domain Constraints>Interfaces>Fixed Constraint, Interface
Layered Shell>More Constraints>Interfaces>Fixed Constraint, Interface (Edge)
Layered Shell>Points>Interfaces>Fixed Constraint, Interface
Ribbon
Physics tab with Layered Shell selected:
Boundaries>Interfaces>Fixed Constraint, Interface
Edges>Interfaces>Fixed Constraint, Interface
Points>Interfaces>Fixed Constraint, Interface