Use the Plasticity subnode to define the properties for modeling elastoplastic materials. This material model can be used together with the
Linear Elastic Material and requires the Nonlinear Structural Material Module.
If the plasticity model differs between layers, you will need to add several Plasticity nodes with different layer selections. If the model is the same, and only the material data values differ, you can use a single
Plasticity node where
From material is used to define the values. The data for each layer is then received from global
Layered Material nodes.
If there are two Plasticity nodes where the same layer is selected on the same boundary, the latter will be overridden on the common selections
Physics tab with Linear Elastic Material node selected in the model tree: