A Far-Field Calculation subnode is added by default to the
Far-Field Domain node and is used to select boundaries corresponding to a single closed surface surrounding all radiating and scattering objects. By default, all exterior boundaries of the
Far-Field Domain are selected. If a
Perfectly Matched Layer (PML) node has been added before adding the
Far-Field Domain, all exterior boundaries of the
Far-Field Domain adjacent to the PML are selected. Symmetry reduction of the geometry makes it relevant to select boundaries defining a nonclosed surface. Also use this feature to indicate symmetry planes and symmetry cuts applied to the geometry, and whether the selected boundaries are defining the inside or outside of the far field domain; that is, to say whether they are facing away from infinity or toward infinity.
Select as needed the Symmetry in the x=0 plane,
Symmetry in the y=0 plane, or
Symmetry in the z=0 plane check boxes to use it your model when calculating the far-field variable. The symmetry planes have to coincide with one of the Cartesian coordinate planes.
When a check box is selected, also choose the type of symmetry to use from the Symmetry type list that appears —
Symmetry in E (PMC) or
Symmetry in H (PEC). The selection should match the boundary condition used for the symmetry boundary. Using these settings, include the parts of the geometry that are not in the model for symmetry reasons in the far-field analysis.
From the Boundary relative to domain list, select
Inside or
Outside (the default) to define if the selected boundaries are defining the inside or outside of the far-field domain (that is, whether facing away from infinity or toward infinity).