Name of the controlling study step or "user" if the feature is controlled manually.
|
|||
Setting this property to on the initial damping factor is used for all parameter steps.
|
|||
on | off
|
|||
on | off
|
|||
Initial step size for parameter. See paramtuning.
|
|||
List of parameter values. Obsolete, use plistarr instead.
|
|||
on | off
|
|||
auto | manual
|
Parametric values loop order. If set to auto, a more efficient loop order is used if possible.
|
||
stop | empty
|
|||
Maximum step size for parameter. See paramtuning.
|
|||
Minimum step size for parameter. See paramtuning.
|
|||
constant | linear
|
|||
plist | psteps
|
Output either the parameters in plist or the solution at the expansion points.
|
||
on | off
|
|||
sparse | filled
|
Method for doing the parameter variation. For sweeptype=sparse, the parameter tuples defined by the columns in plistarr are solved for. This method requires equal length for the rows. For sweeptype=filled, all parameter combinations given by plistarr are solved for.
|