Nyquist
Create a Nyquist plot.
Syntax
model.result(<pgtag>).create(<ftag>,"Nyquist");
model.result(<pgtag>).feature(<ftag>).set(property, <value>);
model.result(<pgtag>).feature(<ftag>).run();
Description
model.result(<pgtag>).create(<ftag>,"Nyquist") creates a Nyquist plot feature named <ftag> belonging to the plot group <pgtag>.
Nyquist plots are used to visualize complex-valued variables. Nyquist plots can be added to 1D plot groups.
The following properties are available:
on | off
on | off
on | off
Whether to use the automatically computed legends or the legends defined in the legends property. The automatic legends display the description and expression for each line.
on | off
none | parent | dataset name
The description of the expressions in expr. Is used in the automatic legends.
on | off
on | off
linpoint | harmonic | lintotal | lintotalavg | lintotalrms | lintotalpeak
on | off
on | off
automatic | manual
Manual legends active when legendmethod is set to manual.
custom | cycle | cyclereset | black | blue | cyan | gray | green | magenta | red | white | yellow
none | cycle | asterisk | circle | diamond | plus | point | square | star | triangle
none | cycle | solid | dotted | dashed | dashdot
interp | datapoints
The solutions to plot. Available when data is not parent and the underlying data has multiple solutions.
An alternative way to specify the solutions to use, allowing you to enter, for example, range(1,1,20). Applicable when innerinput is manualindices.
The times to plot. Available when data is not parent and the underlying solution is transient.
The title to use when titletype is manual.
auto | custom | manual | none
auto if the title contribution should be computed automatically, possibly using the group’s customization. custom if the title contribution should be computed automatically, but customized. manual if the manual title contribution should be used (the title property). none if no title contribution should be used.
on | off
The unit to use for the expression in expr. If the old unit is not valid when the expression changes, the unit property is reset to default.
on | off