none | dataset name
|
|||
The descriptions of the expression in expr. Is used in the automatic title.
|
|||
on | off
|
Whether the expression should be linearized at the linearization point. Applicable only if evalmethod is harmonic.
|
||
How to input the solution to use. manual indicates that solnum is used. manualindices indicates that solnumindices is used. interp indicates that t is used.
|
|||
The times to use, for transient levels. Available when data is not parent and the underlying data is transient.
|
|||
on | off
|
|||
on | off
|
|||
on | off
|
|||
The location definition, if locinput is set to manual: a reference surface, physical z-coordinate, or a relative z-coordinate. Only available when using a Layered Material dataset. Not available for IntVolume.
|
|||
fromdataset | manual
|
The location input: from the dataset or manual. Only available when using a Layered Material dataset. Not available for IntVolume.
|
||
All solutions on all levels
|
|||
An alternative way to specify the solutions to use, allowing you to enter, for example, range(1,1,20). Applicable when looplevelinput is manualindices on a level.
|
|||
all on all levels
|
How to input the solution to use, per level. manual on a level indicates that looplevel is used on that level. manualindices on a level indicates that looplevelindices is used on that level. interp on a level indicates that interp is used on that level.
|
||
abs | real
|
|||
abs | real
|
|||
How to input the outer solutions to use. Applicable only for parametric sweep models. manual indicates that outersolnum is used. manualindices indicates that outersolnumindices is used.
|
|||
An alternative way to specify the outer solutions to use, allowing you to enter, for example, range(1,1,20). Applicable when outerinput is manualindices.
|
|||
An alternative way to specify the solutions to use, allowing you to enter, for example, range(1,1,20). Applicable when innerinput is manualindices.
|
|||
solnum | solutioninfo
|
|||
new | table name
|
The table to use when calling setResult() or appendResult(). new indicates that a new table is created.
|
||
Whether to use inner or outer solutions as columns in the table when calling setResult() or appendResult(). Applicable only for parametric sweep models. The level values (level1, level2, and so on) are the levels in the parametric sweep.
|
|||
on | off
|
|||
The units to use for the expressions in expr. If the old unit is not valid when the expression changes, the unit property is reset to default.
|