arrow | cone
|
|||
number | coord
|
Indicates whether the x-coordinates of the arrows should be specified by number of points to distribute evenly across the data or by coordinates. Available for CoordSysSurface in 2D and CoordSysVolume in 3D.
|
||
number | coord
|
Indicates whether the y-coordinates of the arrows should be specified by number of points to distribute evenly across the data or by coordinates. Available for CoordSysSurface in 2D and CoordSysVolume in 3D.
|
||
number | coord
|
|||
on | off
|
Whether the expression should be linearized at the linearization point. Applicable only if evalmethod is harmonic.
|
||
none | plot name
|
|||
Time corresponding to last selected solnum for transient levels.
|
The time to use, for transient levels. Available when data is not parent and the underlying data is transient.
|
||
The index of the solution to use, per level, or interp, but only for transient solutions. Available when data is not parent and the underlying data has multiple solutions.
|
|||
system | matrix
|
|||
If uniform, then the arrows are distributed uniformly. If uniformanisotropic, then the arrows are distributed uniformly with weights taken from the weight property. If elements, then arrows are drawn in each element. Available for CoordSysLine in 2D and 3D and for CoordSysSurface in 3D.
|
|||
If scaleactive is true: The length scale factor.
|
|||
The index of the solution to use. Available when data is not parent and the underlying data has multiple solutions.
|
|||
solnum | solutioninfo
|
|||
none | coordinate system name
|
|||
The time to use, for transient problems. Available when data is not parent and the underlying data is transient.
|
|||
on | off
|
|||
auto if the title contribution should be computed automatically, possibly using the group’s customization. manual if the manual title should be used (the title property). none if no title should be displayed.
|
|||
stress | strain
|
|||
Number of points in the x direction. Active when arrowxmethod is set to number. Available for CoordSysSurface in 2D and CoordSysVolume in 3D.
|
|||
Absolute coordinates in the x direction, active when arrowxmethod is set to coord. Available for CoordSysSurface in 2D and CoordSysVolume in 3D.
|
|||
Number of points in the y direction. Active when arrowymethod is set to number. Available for CoordSysSurface in 2D and CoordSysVolume in 3D.
|
|||
Absolute coordinates in the z direction, active when arrowymethod is set to coord. Available for CoordSysSurface in 2D and CoordSysVolume in 3D.
|
|||
Number of points in the z direction. Active when arrowzmethod is set to number. Available for CoordSysVolume in 3D.
|
|||
Absolute coordinates in the z direction, active when arrowzmethod is set to coord. Available for CoordSysVolume in 3D.
|