CopyFace

model.component(<ctag>).mesh(<tag>).create(<ftag>,"CopyFace");

model.component(<ctag>).mesh(<tag>).feature(<ftag>).selection(property);

model.component(<ctag>).mesh(<tag>).feature(<ftag>).create(<ftag1>,maptype);

Use model.component(<ctag>).mesh(<tag>).create(<ftag>,"CopyFace") to copy mesh between faces in a 3D geometry.

If you want to specify the orientation of the source mesh on the destination, use model.component(<ctag>).mesh(<tag>).feature(<ftag>).create(<ftag1>,maptype) to add an EdgeMap, OnePointMap, or TwoPointMap attribute feature.

The following properties are available:

Table 4-21: Available Properties for CopyFace
Property	Value	Default	Description
copymethod	auto \| singlecopy \| arraycopy	auto	Type of copy operation.
source	Selection	Empty	Source boundaries.
destination	Selection	Empty	Destination boundary.
smoothcontrol	on \| off	on	Specifies if the operation smooths the mesh across removed control entities.
smoothmaxiter	integer	8 in 2D, 4 in 3D	Specifies the number of smoothing iterations.
smoothmaxdepth	integer	8 in 2D, 4 in 3D	Specifies the maximum element smoothing depth.

Use the properties source and destination to specify the source and destination boundaries. The copymethod property determines if many-to-one or many-to-many copying is used.

Example

Mesh Face 1 of a block and copy the mesh to the opposite Face 6.

Code for Use with Java

Model model = ModelUtil.create("Model");

model.component().create("comp1");

GeomSequence g = model.component("comp1").geom().create("geom1", 3);

MeshSequence m= model.component("comp1").mesh().create("mesh1", "geom1");

g.create("blk1", "Block");

g.run();

m.create("ftri1", "FreeTri");

m.feature("ftri1").selection().set(new int[]{1});

m.create("cpf1", "CopyFace");