QuadraticBezier

Use model.component(<ctag>).geom(<tag>).create(<ftag>,"QuadraticBezier") to create a quadratic Bézier curve in 2D or 3D. The following properties are available:

Table 3-93: Valid Property/Value Pairs for a Quadratic Bézier Curve
Property	Value	Default	Description
color	none \| custom \| integer between 1 and the number of colors in the current theme	none	The color of the selection, either given as an integer indicating a color in the color theme, or as a custom color in the customcolor property. Coloring is only available when selresult in active.
contributeto	String	none	Tag of cumulative selection to contribute to.
customcolor	RGB-triplet	Next available theme color	The color to use. Active when color is set to custom.
p	double[sdim][3]	0	Control points.
selresult	on \| off	off	Create selections of all resulting objects.
selresultshow	all \| obj \| dom \| bnd \| pnt \| off	dom	Show selections, if selresult is on, in physics, materials, and so on; in part instances; or in 3D from a plane geometry. obj is not available in a component’s geometry. dom, bnd, and edg are not available in all features.
w	double[3]	{1, 1/sqrt(2), 1}	Weights for the control points.
workplanesrc	this \| Part Instance feature	this	Part Instance feature to take the work plane from (in 3D only).
workplane	xyplane \| Work Plane feature	xyplane	Work Plane feature that defines the coordinate system (in 3D only). The default, xyplane, is the global Cartesian coordinate system.

Table 3-93: Valid Property/Value Pairs for a Quadratic Bézier Curve

Property

none | custom | integer between 1 and the number of colors in the current theme

none

The color of the selection, either given as an integer indicating a color in the color theme, or as a custom color in the customcolor property. Coloring is only available when selresult in active.

contributeto

String

none

Tag of cumulative selection to contribute to.

customcolor

RGB-triplet

Next available theme color

The color to use. Active when color is set to custom.

on | off

Create selections of all resulting objects.

selresultshow

all | obj | dom | bnd | pnt | off

dom

Show selections, if selresult is on, in physics, materials, and so on; in part instances; or in 3D from a plane geometry. obj is not available in a component’s geometry. dom, bnd, and edg are not available in all features.

double[3]

{1, 1/sqrt(2), 1}

Weights for the control points.

workplanesrc

this | Part Instance feature

this

Part Instance feature to take the work plane from (in 3D only).

workplane

xyplane | Work Plane feature

xyplane

Work Plane feature that defines the coordinate system (in 3D only). The default, xyplane, is the global Cartesian coordinate system.