Cone

Create a right circular cone or cone frustum (conical frustum, truncated cone) in 3D.

model.component(<ctag>).geom(<tag>).create(<ftag>,"Cone");

model.component(<ctag>).geom(<tag>).feature(<ftag>).set(property,<value>);

model.component(<ctag>).geom(<tag>).feature(<ftag>).getType(property);

Use model.component(<ctag>).geom(<tag>).create(<ftag>,"Cone") to create a cone. The following properties are available:

Table 3-41: Valid Property/Value Pairs
Property	Value	Default	Description
ang	double	arctan(1/2) (about 26.565 degrees)	The cone’s semiangle; that is, the angle between the axis and a generator of the conical surface.
axis	double[]	{0,0,1}	Direction of the axis. Vector has length 3 if axistype is cartesian, and length 2 if axistype is spherical.
axistype	x \| y \| z \| cartesian \| spherical	z	Coordinate system used for axis. The value is synchronized with axis.
color	none \| custom \| integer between 1 and the number of colors in the current theme	none	The color of the selection, either given as an integer indicating a color in the color theme, or as a custom color in the customcolor property. Coloring is only available when selresult in active.
customcolor	RGB-triplet	Next available theme color	The color to use. Active when color is set to custom.
h	double	1	Height.
layer	double[]		Thicknesses of layers.
layertop	on \| off	off	Apply layers on top.
layerbottom	on \| off	off	Apply layers on bottom.
layerside	on \| off	on	Apply layers on side.
pos	double[]	{0,0,0}	Center of the bottom circle.
r	double	1	Radius of bottom circle.
rot	double	0	Rotational angle about axis.
rtop	double	0.5	Radius of top circle.
specifytop	angle \| radius	angle	If axistype is angle, the radius of the top circle is given by the ang property. If axistype is radius, the radius of the top circle is given by the rtop property.
type	solid \| surface	solid	Object type.
selresult	on \| off	off	Create selections of all resulting objects.
selresultshow	all \| obj \| dom \| bnd \| edg \| pnt \| off	dom	Show selections, if selresult is on, of resulting objects in physics, materials, and so on, or in part instances. obj is not available in a component’s geometry. dom, bnd, and edg are not available in all features.
contributeto	String	none	Tag of cumulative selection to contribute to.
workplanesrc	this \| Part Instance feature	this	Part Instance feature to take the work plane from.
workplane	xyplane \| Work plane feature	xyplane	Work Plane feature that defines the coordinate system. The default, xyplane, is the global Cartesian coordinate system.

For information about the selresult and contributeto properties, see Selections of Geometric Entities.

Compatibility

model.component(<ctag>).geom(<tag>).create(<ftag>,"cone3") creates a solid cone.

model.component(<ctag>).geom(<tag>).create(<ftag>,"cone2") creates a surface cone.

The following properties are also available:

Table 3-42: Valid Property/Value Pairs
Property	Value	Default	Description
ax2	double[]	{0,0}	Alias for axis when axistype is spherical.
ax3	double[]	{0,0,1}	Alias for axis when axistype is cartesian.
x, y, z	double	0	Alias for pos.